Payment & Shipping Terms:
|Usage:||Construction Hoist||Lift Speed:||10m/min(Single Hook) 5m/min(Double Hook)|
|Place Of Origin:||China||Certification:||CE|
|Method Of Use:||SINGLE HOOK /DOUBLE HOOK||Sling Type:||Wire Rope|
electric chain block hoist,
electric cable hoist with wireless remote control
Hook Type Chain Crane Wire Rope Cable Micro Electric Hoist with Remote Control
Adopt hard tooth surface transmission design for reducer, long life and high efficiency.The motor adopts conical rotor brake motor, and has safety limit device in both directions.
Ring chain electric hoist can be widely used to lift heavy objects or installed in a single beam crane, straight, curved i-beam, can also be used in hoist double beam, hoist gantry crane or cantilever crane, is the industry and mining industry, railway, dock, warehouse commonly used lifting equipment.
1. the machine weight light, compact and reasonable structure, stamping steel shell, lightweight and strong
2. High efficiency, light weight motor, asbestos free brake system, low energy consumption
3. High strength safety hook, which can bear the impact of accidental overload 4
4. Designed for two-way and all-weather use, equipped with adjustable screw-type limit switch, with higher reliable performance
5.the chain galvanized treatment, not easy to rust, lubricating oil tire installed in the gearbox, prevent oil droplets on the stage
6. The chain strap is light, beautiful and durable
Different Products Introduction:
1. Electric Chain Hoist has single speed and dual speed.
2. Fixed Type: there is a hook on the top.
3. Manual Trolley Type:there is a manual trolley on the top,the operater can move the trolley by hands.
4. Electric Trolley Type:the lifting and traveling mechanism are all electric.Moving them by control handle.
5. Low-headroom Electric Hoist : the low-headroom electric chain hoist are designed for those applications where space is limited. The units provide smooth,quiet trouble free operation in a variety of Class III application.Choice of lug mounted push/pull, hand geared or motorized trolley drives geared limit switches for both upper and lower hook trave.
The composition of electric hoist
1. the electric hoist of the motor axis perpendicular to the reel axis adopts the worm gear transmission device, the width size is large, the structure is bulky, the mechanical efficiency is low, and the processing is difficult. At present, no manufacturer has produced the product of this kind of structure.
2.the electric hoist with the axis of the motor parallel to the axis of the reel has the advantages of small height and small length. Its disadvantage is wide size, grouping, manufacturing and assembly complex. The turning radius of the track is large.
3.the electric hoist installed in the drum has the advantages of small size and compact structure. The main disadvantage is that the motor is poor in heat dissipation and poor in grouping. It is inconvenient to check, install and maintain the motor, and the power supply device is complex.
4.the electric hoist installed on the outside of the drum has the advantages of good grouping, high generalization degree, easy lifting height and convenient installation and maintenance. Its disadvantages are its large size and length.
1.Designed and developed with the FEM standard, advanced idea and beautiful exterior;
2. The drive units use China's advanced point-line meshing gear structure. It is easy and convenient to handle with the compact and reasonable whole structure;
3.It is safe and efficient to operate, and meet current requirements of low noise and environmental protection;
4.Using 13 proprietary technologies and utilize frequency control design to reduce the impact force to accomplish precise positioning;
5.Equipped with intelligent safe operation monitoring recorder like the "black box" on plane which can uninterruptedly record working status and prevent unprofessional operations.
6.Maintenance-free design of whole body and less wearing parts make it convenient to maintain.
1. Used for lifting heavy goods and installing equipment, in the workshops of machinery factories and repair shops.
2. Used for lifting and stacking materials in material warehouse and goods yards.
3. Used for hoisting prefabricates and cement pipes in construction industry.
4. Used for lifting heavy goods in the warehouse of light textile factories and workshop of hospitals, shops, and food products factories.
5. Used for lifting heavy goods at the wharfs.
1.1 (one)year guarantee.
2. Providing free maintenances for spare parts, and you are supposed to pay for the new components.
3. Engineer to supervise installation, make the load test, do commissioning, train of the buyer's workers etc. will be provided.
4. Delivery with English version user manual, parts manual, test certificates, class certificate and all other related documents.
5. Technique support at anytime if need.
Contact Person: admin