Payment & Shipping Terms:
|Warranty:||12 Months||Application:||Tower Crane|
|After-sales Service Provided:||Online Support||Size:||Standar Size|
|Feature:||High Efficiency||Accessories:||Including A Full Set Pin|
overhead crane components,
crane wheel assembly
Swievel Forged Mobile Crane Spare Parts Hook with Safety Latch
Hook is usually equipped with a safety latch to prevent the disengagement of the lifting wire rope sling, chain or rope to which the load is attached.
Hooks can be classified into single hook and double hooks according to the appearance; forged hooks and strapped hooks according to production method.
Hook is connected to the crane and the weight of the link, plays a vital role, and must attach importance to the maintenance of it. So if the hook hoisting height limiter or hook locking device failure or damage, the hook absolutely cannot be used.
|Specifications||technical parameter(mm)||Installation of wire rope||weight(kg)|
Brief introduction of electric hoist lift hook:
1.Hooks can be classified into single hook and double hooks according to the appearance; forged hooks and strapped hooks according to production method.
2. A lifting hook is a device for grabbing and lifting loads by means of a device such as a hoist or crane. A lifting hook is usually equipped with a safety latch to prevent the disengagement of the lifting wire rope sling, chain or rope to which the load is attached.
3.Lifting equipment hooks have single hook and double hooks according to shape of hook. Fivestrength grades M,P,S,T,V,are classified in accordance with mechanical property. Forging hook andstrap type hook are manufactured according to method of manufacturing.
4.Forged hook is connected to the crane and the weight of the link, plays a vital role, must attachimportance to the maintenance of it. So if the hook hoisting height limiter or hook locking devicefailure or damage, the hook absolutely cannot be used.
Heavy Duty Large Capacity Hook Group varies from 400 ton to 2200 ton. Offer me hook drawing, we can customize for you. If there is no drawing, we will offer you our standard type to see whether that meets your requirements. Hook made in MHICRANE is of high strength, made of Mn material. It is widely used home and abroad.
Advantages of Roof Pulling Cargo Lifting Wireless Remote Control 5 Ton Electric Motor Wire Rope Hoist Mechanical Hoist With Hoist Hook:
2. Light weight.
3.Safe and reliable Components and parts apply used universally strong compatibility.
4.High lifting capacity .
7.Accurate lifting steady operation.
One of the following cases happens, and discard as useless:
2.Abrasion of dangerous fracture surface reaches 10% of full size.
3.The degree of opening adds to 15% than the full size.
4.Torsional deformation exceeds 10°.
5.Dangerous fracture surface and hook neck have plastic deformation.
6.The lining of board hook abrades reaches 50% of full size and should be discarded as useless.
7.The mandrel of board hook abrades reaches 50% of full size and should be discarded as useless.
Specification for use of crane hook:
1. The load shall be in the middle of hook seat during lifting;
2. When lifting, it shall be as stable as possible, with hook set to avoid impact load;
3. The hook surface shall be kept clean, non-standard hook group, free of peeling, sharp angle, burr, crack, etc.
As this kind of crane is customized, in order to offer you most suitable design and best solution, please confirm following information when you send inquiry.
1. Lifting capacity (T).
2. Lifting height.(hook center to ground) (m).
3. Power supply (V/HZ/Ph).
4. The distance between two rail center.
5. Would be better if you have drawings of your plant.
One year warranty.
Providing free quick-wear part.
Low charge for continue maintenance when warranty is expired.
Exclusive engineer support at any time.
We can provide free training to end-users.
Contact Person: admin