|
Product Details:
|
| Keywords: | Single Beam Gantry Crane | Condition: | New |
|---|---|---|---|
| Feature: | Easy To Manufacture And Install | Span: | 5-40m Or On Request |
| Max. Lifting Load: | 10 Ton | Max. Lifting Height: | 9m,12m,6m |
| Power Source: | 3 Phase 380V 50hz Or Accord Your Requirements | Application: | Workshop |
| High Light: | Workshop 200 Ton Gantry Crane,200 Ton Gantry Crane Single Girder,Easy Install L Type gantry crane |
||
Easy To Manufacture And Install Single Girder Workshop Gantry Crane
Introduction:
The single main girder gantry crane has a simple structure, is easy to manufacture and install, and has a small weight. The main girder is mostly an off-track box frame structure. Compared with the double main girder gantry crane, the overall stiffness is weaker. Therefore, when the lifting weight Q≤50t and the span S≤35m, this form can be adopted. Single main girder gantry crane gantry legs are available in two forms: L type and C type. The L-type is easy to manufacture and install, has good stress condition, and its own quality is small, but the space where the goods are lifted through the outriggers is relatively small. The legs of the C-type are inclined or curved in order to have a large lateral space so that the goods can pass through the legs smoothly.
Product Features:
1. Simple and compact structure, steady performance.
2. Easy to install and high efficiency.
3. Overload, low voltage protective device.
4. Pendent control and remote control.
5. Easy maintenance.
Technical Parameter:
| Load Capacity (ton) |
Span /Rail Gauge (m) |
Max. Lifting height-H2 (m) |
| 5 | 5~35 | 5~25 |
| 10 | 5~35 | 5~25 |
| 16 | 10~50 | 5~25 |
| 20 | 10~50 | 5~35 |
| 25 | 10~50 | 5~35 |
| 32 | 10~50 | 5~35 |
| 50/10 | 10~50 | 5~35 |
| 70 | 10~50 | 5~35 |
| 100 | 10~50 | 5~35 |
| 120 | 10~50 | 5~35 |
| 150 | 10~50 | 5~35 |
| 200 | 15~50 | 10~35 |
| 250 | 15~50 | 10~35 |
| 300 | 15~50 | 10~35 |
| 350 | 15~50 | 10~35 |
| 400~800 | 15~50 | 10~35 |
| Customizable | Customizable | Customizable |
Application:
Gantry cranes are mainly used for the loading and unloading of outdoor cargo yards, stockyards and bulk cargoes. Its metal structure is like a door-shaped frame, and two feet are installed under the bearing main beam, which can walk directly on the track on the ground, and the two ends of the main beam can have outrigger cantilevers. Gantry cranes have the characteristics of high site utilization, large operating range, wide adaptability and strong versatility, and are widely used in port cargo yards.
Photos:
Contact Person: Tina Tan
Tel: +8613875750450
Fax: 86-755-23343104
