|
Product Details:
|
| Keywords: | Gantry Crane Single Girder | Condition: | New |
|---|---|---|---|
| Feature: | Box Type | Span: | 5-40m Or On Request |
| Max. Lifting Load: | 10 Ton | Max. Lifting Height: | 9m,12m,6m |
| Power Source: | 3 Phase 380V 50hz Or Accord Your Requirements | Application: | Workshop Loading And Unloading |
| High Light: | L Leg 30 Ton Gantry Crane,Box Type 30 Ton Gantry Crane,Workshop Loading Unloading Crane |
||
Box Type L Leg 30 Ton Gantry Crane Single Girder For Workshop Loading And Unloading
Introduction:
The single main girder gantry crane has a simple structure, is convenient to manufacture and install, and has a small weight. Compared with the double girder gantry crane, the overall rigidity is weaker. Therefore, when the lifting capacity Q≤50t and the span S≤35m, this form can be used. Single main girder gantry crane gantry legs are available in two forms: L type and C type. The L-type is easy to manufacture and install, has good stress condition, and its own quality is small. However, the space for lifting goods through the outrigger is relatively small. The legs of the C-type are inclined or curved in order to have a large lateral space so that the goods can pass through the legs smoothly.
Product Features:
1. Simple and compact structure, steady performance.
2. Easy to install and high efficiency.
3. Overload, low voltage protective device.
4. Pendent control and remote control.
5. Easy maintenance.
Technical Parameter:
|
Lifting Weight(t)
|
3
|
5
|
10
|
16
|
20
|
|
Span(m)
|
12/16/20/24
|
12/16/20/24/30
|
12/16/20/24/30
|
12/16/20/24/30
|
12/16/20/24/30
|
|
Lifting Height(m)
|
6/9
|
6/9
|
6/9
|
6/9
|
6/9
|
|
Working Grade
|
A5
|
A5
|
A5
|
A5
|
A5
|
|
Steel Track Recommended
|
P24/P38
|
P24/P38
|
P38/P43
|
P38/P43
|
P43/P50
|
|
Power Supply
|
3PH, 380V, 50HZ
|
3PH, 380V, 50HZ
|
3PH, 380V, 50HZ
|
3PH, 380V, 50HZ
|
3PH, 380V, 50HZ
|
Application:
Gantry cranes are mainly used for the loading and unloading of outdoor cargo yards, stockyards and bulk cargoes. Its metal structure is like a door-shaped frame, and two feet are installed under the bearing main beam, which can walk directly on the track on the ground, and the two ends of the main beam can have outrigger cantilevers. Gantry cranes have the characteristics of high site utilization, large operating range, wide adaptability and strong versatility, and are widely used in port cargo yards.
Photos:
Contact Person: Tina Tan
Tel: +8613875750450
Fax: 86-755-23343104
