|
Product Details:
|
| Keywords: | Box Beam Single Girder Gantry Crane | Type: | L Type Legs |
|---|---|---|---|
| Feature: | Easy To Manufacture And Install | Span: | 5-40m Or On Request |
| Max. Lifting Load: | 10 Ton | Max. Lifting Height: | 9m,12m,6m |
| Power Source: | 3 Phase 380V 50hz Or Accord Your Requirements | Application: | Workshop |
| High Light: | 200t Single Girder Gantry Crane,Pendant Control Single Girder Gantry Crane |
||
200t Easy Install L Type Box Beam Single Girder Gantry Crane Workshop
Introduction:
Outriggers are the key to supporting the operation of the gantry crane. There are pulleys under the outriggers. During the operation, the track is placed in the working area to drive the gantry crane to move freely in the working area, and the gantry crane can be placed as needed. . The role of the outriggers of the gantry crane is fully highlighted at this time.
Box girder:
The steel plate is welded into a box-type structure, which has the characteristics of high safety and high rigidity. Generally used for large tonnage and super tonnage gantry cranes. As shown in the overview picture MGhz1200, with a lifting capacity of 1200 tons, is the largest gantry crane in China, and the main beam adopts a box girder structure. Box girder also has the disadvantages of high cost, heavy self-weight and poor wind resistance.
Product Features:
1. Simple and compact structure, steady performance.
2. Easy to install and high efficiency.
3. Overload, low voltage protective device.
4. Pendent control and remote control.
5. Easy maintenance.
Technical Parameter:
| Load Capacity (ton) |
Span /Rail Gauge (m) |
Max. Lifting height-H2 (m) |
| 5 | 5~35 | 5~25 |
| 10 | 5~35 | 5~25 |
| 16 | 10~50 | 5~25 |
| 20 | 10~50 | 5~35 |
| 25 | 10~50 | 5~35 |
| 32 | 10~50 | 5~35 |
| 50/10 | 10~50 | 5~35 |
| 70 | 10~50 | 5~35 |
| 100 | 10~50 | 5~35 |
| 120 | 10~50 | 5~35 |
| 150 | 10~50 | 5~35 |
| 200 | 15~50 | 10~35 |
| 250 | 15~50 | 10~35 |
| 300 | 15~50 | 10~35 |
| 350 | 15~50 | 10~35 |
| 400~800 | 15~50 | 10~35 |
| Customizable | Customizable | Customizable |
Application:
Gantry cranes are mainly used for the loading and unloading of outdoor cargo yards, stockyards and bulk cargoes. Its metal structure is like a door-shaped frame, and two feet are installed under the bearing main beam, which can walk directly on the track on the ground, and the two ends of the main beam can have outrigger cantilevers. Gantry cranes have the characteristics of high site utilization, large operating range, wide adaptability and strong versatility, and are widely used in port cargo yards.
Photos:
Contact Person: Tina Tan
Tel: +8613875750450
Fax: 86-755-23343104
